Air plasma cutting machine how to use?

PostTime: 2017-11-24 14:34:33    Views: 4071


REVIEW: air plasma cutting machine is used to cut some special metal material equipment, which through special treatment such as high temperature, it can quickly cut metal products, stainless steel metal can easily be solved, and the use of air plasma cutting machine cutting The metal is very regular and the work load is very small. It can only be cut locally without affecting the physical properties of other parts of the metal. So you know the correct use of air plasma cutting machine? Here we take a look at the use of air plasma cutting machine it.

Air plasma cutting machine to use:

First: the installation method

In the installation of air plasma cutting machine, we need to consider the cutting machine power line, it needs to meet the national installation standards, not too long.

Air plasma cutter torch installation needs to ensure that the installation is complete and have enough degree of fastening. First of all, you need to cut the air plasma cutting machine to install the workpiece, and then install the cutting ground wire workpiece.

Second: debugging methods

Need to air plasma cutting machine air compressor air pressure to make the appropriate adjustments, we must first start the operation of the air compressor, and then raise the pressure inside it to a certain extent, and then open the compressor bleed valve, and then The air compressor starts up again, adjusting its pressure accordingly.

Need to adjust the air filter regulator, the compressor needs to be the height of gas pressure inside the gas tank, and then open the test gas switch, the pressure relief valve to adjust the pressure to a normal state.

Third: the actual method of operation

First of all, the air plasma cutting machine to be installed, after the completion of the installation, its inspection, the need for its internal electrode nozzle inspection to see if it is installed correctly, after the completion of the inspection, the air plasma cutting machine power and origin, and then Then talk about the power of the main machine is turned on, then we can see the nozzle which emits gas.

After the gas appears in the nozzle, check the thickness of the cut material, and then adjust it to the appropriate thickness of the cut material. And then cut the workpiece placed in place, and cut the ground clip caught in the workpiece on the device, to complete the above operation, you can cut, you need uniform cutting, cutting is successful, the air plasma cutting machine cutting torch Switch off, then turn off the other switches, and wait for the device to cool down.

Back: CNC plasma cutting machine how to choose gas?
Next: Spot welding classification and daily inspection